The FH1250SX 5-axis is a five-axis horizontal machining center designed for complex, large part machining. It features a 15,000 RPM integral tilting spindle and rapid feed rates of 1,260 ipm (32 m/min) on the X and Y axes and 1,654 ipm (42 m/min) on the Z axis.
| Pallet Size | 49.2" x 49.2" (1,250 mm x 1,250 mm) |
| X-axis Travel | 86.6" (2,200 mm) |
| Y-axis Travel (spindle head) | 63” (1,600 mm) |
| Z-Axis Travel | 72.8" (1,850 mm) |
| Max. Workpiece Swing (diameter) | 94.48” (2,400 mm) |
| Max. Workpiece Height | 70.87” (1,800 mm) |
| Maximum Load on Pallet | 11,000 lb (5,000 kg) |
| Spindle Speed | 15,000 RPM |
| Spindle Taper | CAT50 |
| Rapid Feedrate (X,Y and Z) | 1,260 ipm (32 m/min) |
| Tool Storage Capacity | 60, 121, 240, 330 |
| Pallet Size | 49.2" x 49.2" (1,250 mm x 1,250 mm) |
| X-axis Travel | 86.6" (2,200 mm) |
| Y-axis Travel (spindle head) | 63” (1,600 mm) |
| Z-Axis Travel | 72.8" (1,850 mm) |
| Max. Workpiece Swing (diameter) | 94.48” (2,400 mm) |
| Max. Workpiece Height | 70.87” (1,800 mm) |
| Maximum Load on Pallet | 11,000 lb (5,000 kg) |
| Spindle Speed | 15,000 RPM |
| Spindle Taper | CAT50 |
| Rapid Feedrate (X,Y and Z) | 1,260 ipm (32 m/min) |
| Tool Storage Capacity | 60, 121, 240, 330 |
| Pallet Size | 49.2" x 49.2" (1,250 mm x 1,250 mm) |
| X-axis Travel | 86.6" (2,200 mm) |
| Y-axis Travel (spindle head) | 63” (1,600 mm) |
| Z-Axis Travel | 72.8" (1,850 mm) |
| Max. Workpiece Swing (diameter) | 94.48” (2,400 mm) |
| Max. Workpiece Height | 70.87” (1,800 mm) |
| Maximum Load on Pallet | 11,000 lb (5,000 kg) |
| Spindle Speed | 15,000 RPM |
| Spindle Taper | CAT50 |
| Rapid Feedrate (X,Y and Z) | 1,260 ipm (32 m/min) |
| Tool Storage Capacity | 60, 121, 240, 330 |
| Linear Position Accuracy (X, Y, and Z axes) | ± .00012" (±0.003 mm) full stroke | |
| Linear Repeatability (X, Y, and Z axes) | ± 0.00008" (± 0.002 mm) | |
| Rotary Table Index Accuracy | ± 7 arc seconds | |
| Rotary Table Index Repeatability | ± 3.5 arc seconds | |
| A-axis Accuracy | ± 5 arc seconds | |
| A-axis Repeatability | ± 3 arc seconds |
| Hydraulic Oil | Mobil DTE Oil Light (16.6 gal) | |
| Slideway Lubrication | Mobil Vactra #2 (1.5 gal) | |
| Spindle Bearing Lubrication | Mobil Velocite #6 (.76 gal) | |
| Spindle Cooling | Mobil Velocite #3 (5.3 gal) | |
| Table Lubrication | Mobil Gear 600 XP 150 (1.1 gal) | |
| Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) | |
| Power Capacity (Machine Wired: 208V - Transformer Not Included) | 59 kVA |
Specifications are subject to change without notice.
The FH1250SX 5-axis is a five-axis horizontal machining center designed for complex, large part machining.
Watch a demonstration on the FH1250SX 5-axis horizontal machining center.
TOYOTech will have the FH1250SX 5-Axis Horizontal Machining Center on demonstration
Machine: FA1050 5-Axis Horizontal Machining Center
Material: SMG P3 - 8620 Steel
X-Axis: 25.1” (640 mm) – 31.5” (800 mm)
Y-Axis: 20.4” (520 mm) – 37.4” (950 mm)
Z-Axis: 18.1” (460 mm) – 25.6” (650 mm)
Spindle: 15,000 RPM or 22,000 RPM
