5-Axis Machining Centers
Industry-leading high precision performance optimized for speed, rigidity, and reliability.
FA1050S-5Axis
Complex 5-axis machining is achieved with the FA1050S 5-Axis trunnion table. Its dual-drive mechanisms support heavy workpieces, while the high-resolution rotary encoders ensure precise positioning during simultaneous 5-axis applications.
JTEKT Advantage ROI Justification
FERROUS SPECS
| Pallet Size | 41.3" x 41.3" (1,050 mm x 1,050 mm) |
| Trunnion Table Index Increment (A-axis) | .0001 degree (-100° ~ +15°) |
| Trunnion Table Index Increment (B-axis) | .0001 degree |
| X-axis Travel | 59.1" (1,500 mm) |
| Y-axis Travel (spindle head) | 55.1" (1,400 mm) |
| Z-Axis Travel | 45.2” (1,150 mm) |
| Max. Workpiece Swing (diameter) | 51.18” (1,300 mm) |
| Max. Workpiece Height | 32.48” (825 mm) |
| Maximum Load on Pallet | 4,400 lb (2,000 kg) |
| Spindle Torque | 391 ft-lb (530 Nm) |
| Spindle Speed | CAT#50 60HP 6,000 RPM (Geared Head 1,305 Nm) |
| Spindle Speed | CAT#50 50HP 15,000 RPM (Wide Range 530 Nm) |
| Spindle Taper | 590 ipm (15 m/min) |
| Rapid Feedrate (X,Y and Z) | 944 ipm (24 m/min) |
| Tool Storage Capacity | 944 ipm (24 m/min) |
| Rapid feedrate - X axis | 60 Standard (190, 240, 384 Optional) |
| Rapid feedrate - Y axis | 276" x 331" (7,000 mm x 8,400 mm) |
| Rapid feedrate - Z axis | 161" (4,100 mm) |
| Cutting feedrate | 112,436 lbs (51,000 kg) |
NON-FERROUS SPECS
| Pallet Size | 41.3" x 41.3" (1,050 mm x 1,050 mm) |
| Trunnion Table Index Increment (A-axis) | .0001 degree (-100° ~ +15°) |
| Trunnion Table Index Increment (B-axis) | .0001 degree |
| X-axis Travel | 59.1" (1,500 mm) |
| Y-axis Travel (spindle head) | 55.1” (1,400 mm) |
| Z-Axis Travel | 45.2” (1,150 mm) |
| Max. Workpiece Swing (diameter) | 51.18” (1,300 mm) |
| Max. Workpiece Height | 32.48” (825 mm) |
| Maximum Load on Pallet | 4,400 lb (2,000 kg) |
| Spindle Torque | 123 ft-lb (167 Nm) |
| Spindle Speed | CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec) |
| Spindle Taper | 590 ipm (15 m/min) |
| Rapid Feedrate (X,Y and Z) | 944 ipm (24 m/min) |
| Tool Storage Capacity | 944 ipm (24 m/min) |
| Rapid feedrate - X axis | 60 Standard (190, 240, 384 Optional) |
| Rapid feedrate - Y axis | 276" x 331" (7,000 mm x 8,400 mm) |
| Rapid feedrate - Z axis | 161" (4,100 mm) |
| Cutting feedrate | 112,436 lbs (51,000 kg) |
HIGH TEMP ALLOY SPECS
| Pallet Size | 41.3" x 41.3" (1,050 mm x 1,050 mm) |
| Trunnion Table Index Increment (A-axis) | .0001 degree (-100° ~ +15°) |
| Trunnion Table Index Increment (B-axis) | .0001 degree |
| X-axis Travel | 59.1" (1,500 mm) |
| Y-axis Travel (spindle head) | 55.1” (1,400 mm) |
| Z-Axis Travel | 45.2” (1,150 mm) |
| Max. Workpiece Swing (diameter) | 51.18” (1,300 mm) |
| Max. Workpiece Height | 32.48” (825 mm) |
| Maximum Load on Pallet | 4,400 lb (2,000 kg) |
| Spindle Torque | 744 ft-lb (1,009 Nm) |
| Spindle Speed | CAT#50 50HP 8,000 RPM (High Torque 1,009 Nm) |
| Spindle Taper | 590 ipm (15 m/min) |
| Rapid Feedrate (X,Y and Z) | 944 ipm (24 m/min) |
| Tool Storage Capacity | 944 ipm (24 m/min) |
| Rapid feedrate - X axis | 60 Standard (190, 240, 384 Optional) |
| Rapid feedrate - Y axis | 276" x 331" (7,000 mm x 8,400 mm) |
| Rapid feedrate - Z axis | 161" (4,100 mm) |
| Cutting feedrate | 112,436 lbs (51,000 kg) |
ACCURACY
| Linear Position Accuracy | ± .000078" (±0.002 mm) full stroke | |
| Linear Repeatability | ± 0.000039" (± 0.001 mm) | |
| Rotary Positioning Accuracy (A and B axes) | ± 5 arc seconds | |
| Rotary Positioning Repeatability (A and B axes) | ± 3 arc seconds |
REEQUIREMENTS
| Hydraulic Oil | Mobil DTE Oil Light (16.6 gal) (63 liter) | |
| Slideway Lubrication | Daphine Multiway 32C 1.5 gal (5.5 liter) | |
| Spindle Bearing Lubrication | Mobil Velocite #3 (9.2 gal) (35 liter) | |
| A, B Axis Lubrication | Mobil Gear 600 XP 68 A axis (10.6 gal/40 liter) B axis (5.3 gal/20 liter) | |
| Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) | |
| Power Capacity (Machine Wired: 208V - Transformer Not Included) | 71 kVA | |
Specifications are subject to change without notice.
FA1050S 5-Axis Horizontal Machining Center
Five-axis machining is achieved with the FA1050S 5-Axis (Horizontal Machining Center) trunnion table.
FA1050S 5-Axis Horizontal Machining Center at IMTS 2016
FA1050S 5-axis Horizontal Machining Center at IMTS 2016.
Live Machining Demo of 5-Axis High Feed and High Speed Profit Milling
Machine: FA1050 5-Axis Horizontal Machining Center
Material: SMG P3 - 8620 Steel
Full Line of 5-Axis Machining Centers
UG Series
X-Axis: 25.1” (640 mm) – 31.5” (800 mm)
Y-Axis: 20.4” (520 mm) – 37.4” (950 mm)
Z-Axis: 18.1” (460 mm) – 25.6” (650 mm)
Spindle: 15,000 RPM or 22,000 RPM
