High Production
For ultra high-volume solutions and maximum quality control.
e640V
Ideal machine for production line of automotive engine parts, the e640V is built with a 12,000 RPM vertical spindle for mass production of aluminum parts such as cylinder block, cylinder head, mission case and rack housing. Includes standard production-line features such as through-table hydraulics, broken tool detection, JTEKT Machinery's patented replaceable taper, ultra-fast tool change, and automation interfaces.
JTEKT Advantage ROI Justification
FERROUS SPECS
| Controller | Fanuc 32i MB |
| Work Envelope | 18.90" x 29.53" (480 mm x 750 mm) |
| Table Index | NC Rotary TILT Table (360,000 positions) |
| X-axis Travel | 23.62" (600 mm) |
| Y-axis Travel (spindle head) | 19.69" (500 mm) |
| Z-Axis Travel | 15.75" (400 mm) |
| Max. Workpiece Swing (diameter) | Ø23.62" (Ø600 mm) |
| Maximum Table Load | 551.16 lb (250 kg) |
| Spindle Torque | 48 Nm |
| Spindle Speed | HSK-A63 15 HP 12,000 RPM |
| Spindle Taper | 1,889.76 ipm (48 m/min) |
| Rapid Feedrate (X,Y and Z) | 1,889.76 ipm (48 m/min) |
| Tool Storage Capacity | 1,889.76 ipm (48 m/min) |
| Rapid feedrate - X axis | 22 Standard |
| Rapid feedrate - Y axis | 55.12" x 144.06" (1,400 mm x 3,659 mm) |
| Rapid feedrate - Z axis | 100.63" (2,556 mm) |
| Cutting feedrate | 12,125 lb (5,500 kg) |
| Notes | Includes Fixture Hyd PU & Valves |
NON-FERROUS SPECS
| Controller | Fanuc 32i MB |
| Work Envelope | 18.90" x 29.53" (480 mm x 750 mm) |
| Table Index | NC Rotary TILT Table (360,000 positions) |
| X-axis Travel | 23.62" (600 mm) |
| Y-axis Travel (spindle head) | 19.69" (500 mm) |
| Z-Axis Travel | 15.75" (400 mm) |
| Max. Workpiece Swing (diameter) | Ø23.62" (Ø600 mm) |
| Maximum Table Load | 551.16 lb (250 kg) |
| Spindle Torque | 48 Nm |
| Spindle Speed | HSK-A63 15 HP 12,000 RPM |
| Spindle Taper | 1,889.76 ipm (48 m/min) |
| Rapid Feedrate (X,Y and Z) | 1,889.76 ipm (48 m/min) |
| Tool Storage Capacity | 1,889.76 ipm (48 m/min) |
| Rapid feedrate - X axis | 22 Standard |
| Rapid feedrate - Y axis | 55.12" x 144.06" (1,400 mm x 3,659 mm) |
| Rapid feedrate - Z axis | 100.63" (2,556 mm) |
| Cutting feedrate | 12,125 lb (5,500 kg) |
| Notes | Includes Fixture Hyd PU & Valves |
HIGH TEMP ALLOY SPECS
ACCURACY
| Linear Position Accuracy | ± .0003" (.008 mm) full stroke |
| Linear Repeatability | ± .0001" (.003 mm) |
| Rotary Table Index Accuracy | ± 15 seconds |
| Rotary Table Index Repeatability | ± 5 seconds |
REEQUIREMENTS
| Hydraulic Oil | Mobil DTE Oil Light ( 4.76 gal) |
| Slideway Lubrication | Mobil Vactra #2SLC (.76 gal) |
| Spindle Bearing Lubrication | NOK Klueber Grease BF72-22 |
| Tilt Lubrication | Mobil Gear 600 XP 150 (1.18 gal) |
| Air Source | 43 psi (0.3 Mpa) |
| Power Capacity (Machine Wired: 208V - Transformer Not Included) | 29 kVA |
Specifications subject to change without notice.
Full Line of High Production
Gemini Series
The Gemini Twin Spindle series is designed to handle high production volumes in a variety of sizes.
View Models
Drill Tap Centers
The DTC machines are designed for drill tap applications and full milling capabilities.
View Models
Transfer Lines
Production-type horizontal and vertical machining centers for ferrous and non-ferrous applications.
View Models