UB-6022D-20 | JTEKT Machinery North America
Find Distributor
Contact Us
Careers
Request a Quote
Videos
English Deutsch

Vertical Machining Centers

High speed, high performance, and high load capacities machining centers to lower your cost per part.

UB-6022D-20

A digital high speed, six head multi-spindle machine designed and popularly used for Printed Circuit Board (PCB) machining. This series is also suited for non-PCB production applications in metals, plastics, etc.

This box type machine base and column are reinforced by inner ribs precisely positioned to increase the damping effect of the machine and increase rigidity. The base and column is a one-piece cast design, aged for four months to stabilize the casting before manufacturing.

This PCB drilling machine features patented NSK pre-tensioned, silent, ball screws installed in order to meet ultra high-speed positioning requirements.

RFQ


JTEKT Advantage ROI Justification
UB 6022 PCB Machine
UB 6022 PCB Machine
UB 6022 PCB Machine Open Door 700x700

FERROUS SPECS

Table Size 29” x 130” (730 x 3,300 mm)
Spindle Type High frequency air bearing spindle
# of Spindles 6 sets
Spindle Distance 22” (550 mm)
Spindle Nose 160,000 / 200,000 RPM
Spindle Collet 1/8"
Maximum Working Range 21.5” x 27” (545 x 690 mm)
X,Y-Axis Rapid Positioning Speed 1,968 ipm (50 m/min)
Z-Axis Rapid Positioning Speed 1,181 ipm (50 m/min)
Rapid feedrate - X axis 350 bits
Machine Dimensions (L x W x H) 173” x 85.5” x 89” (4,400 x 2,170 x 2,260 mm)
Machine Weight 20,283 lbs (9,200 kg)
X,Y-Axis Positioning System Driven by full digital AC servo motor with linear scale
X,Y-Axis Minimum Setting Unit 0.00004” (0.001 mm)
X,Y-Axis Position Accuracy Full stroke ± 0.0002” (0.005 mm)
Z-Axis Positioning System Driven by its own motor respectively and independently
Z-Axis Minimum Setting Unit 0.00004” (0.001 mm)
Z-Axis Feeding Speed 1~394 ipm (1~9,999 mm/min)
Drilling Accuracy Within ±.0008" (0.02 mm) (ASTRON Condition)
Air Clamping Stack-PIN
CNC Controller S&M CNC 84.00
CPU Specification 2 GHz
Hard Disk ≧80 GB
Memory Volume 512 MB
Interface USB
Operation System Mouse, Keyboard, LCD Monitor

NON-FERROUS SPECS

Table Size 29” x 130” (730 x 3,300 mm)
Spindle Type High frequency air bearing spindle
# of Spindles 6 sets
Spindle Distance 22” (550 mm)
Spindle Nose 160,000 / 200,000 RPM
Spindle Collet 1/8"
Maximum Working Range 21.5” x 27” (545 x 690 mm)
X,Y-Axis Rapid Positioning Speed 1,968 ipm (50 m/min)
Z-Axis Rapid Positioning Speed 1,181 ipm (50 m/min)
Rapid feedrate - X axis 350 bits
Machine Dimensions (L x W x H) 173” x 85.5” x 89” (4,400 x 2,170 x 2,260 mm)
Machine Weight 20,283 lbs (9,200 kg)
X,Y-Axis Positioning System Driven by full digital AC servo motor with linear scale
X,Y-Axis Minimum Setting Unit 0.00004” (0.001 mm)
X,Y-Axis Position Accuracy Full stroke ± 0.0002” (0.005 mm)
Z-Axis Positioning System Driven by its own motor respectively and independently
Z-Axis Minimum Setting Unit 0.00004” (0.001 mm)
Z-Axis Feeding Speed 1~394 ipm (1~9,999 mm/min)
Drilling Accuracy Within ±.0008" (0.02 mm) (ASTRON Condition)
Air Clamping Stack-PIN
CNC Controller S&M CNC 84.00
CPU Specification 2 GHz
Hard Disk ≧80 GB
Memory Volume 512 MB
Interface USB
Operation System Mouse, Keyboard, LCD Monitor

HIGH TEMP ALLOY SPECS

ACCURACY

X,Y-Axis PositionFull stroke ± 0.0002” (0.005 mm)
Drilling AccuracyWithin ±.0008" (0.02 mm) (ASTRON Condition)

REEQUIREMENTS

Total Power ConsumptionAC200/220V, 50/60Hz, 20KVA
Air Consumption237.8 gal/min (900 L/min)
Compressed Air Requirements99.6-113.8 psi (7-8 kg/cm2)
Vacuum Pressure for Chip Collection1900 mm-H2O
Static Air Pressure for Chip Collection4 CMM
Table Size 29” x 130” (730 x 3,300 mm)
Spindle Type High frequency air bearing spindle
# of Spindles 6 sets
Spindle Distance 22” (550 mm)
Spindle Nose 160,000 / 200,000 RPM
Spindle Collet 1/8"
Maximum Working Range 21.5” x 27” (545 x 690 mm)
X,Y-Axis Rapid Positioning Speed 1,968 ipm (50 m/min)
Z-Axis Rapid Positioning Speed 1,181 ipm (50 m/min)
Rapid feedrate - X axis 350 bits
Machine Dimensions (L x W x H) 173” x 85.5” x 89” (4,400 x 2,170 x 2,260 mm)
Machine Weight 20,283 lbs (9,200 kg)
X,Y-Axis Positioning System Driven by full digital AC servo motor with linear scale
X,Y-Axis Minimum Setting Unit 0.00004” (0.001 mm)
X,Y-Axis Position Accuracy Full stroke ± 0.0002” (0.005 mm)
Z-Axis Positioning System Driven by its own motor respectively and independently
Z-Axis Minimum Setting Unit 0.00004” (0.001 mm)
Z-Axis Feeding Speed 1~394 ipm (1~9,999 mm/min)
Drilling Accuracy Within ±.0008" (0.02 mm) (ASTRON Condition)
Air Clamping Stack-PIN
CNC Controller S&M CNC 84.00
CPU Specification 2 GHz
Hard Disk ≧80 GB
Memory Volume 512 MB
Interface USB
Operation System Mouse, Keyboard, LCD Monitor
Table Size 29” x 130” (730 x 3,300 mm)
Spindle Type High frequency air bearing spindle
# of Spindles 6 sets
Spindle Distance 22” (550 mm)
Spindle Nose 160,000 / 200,000 RPM
Spindle Collet 1/8"
Maximum Working Range 21.5” x 27” (545 x 690 mm)
X,Y-Axis Rapid Positioning Speed 1,968 ipm (50 m/min)
Z-Axis Rapid Positioning Speed 1,181 ipm (50 m/min)
Rapid feedrate - X axis 350 bits
Machine Dimensions (L x W x H) 173” x 85.5” x 89” (4,400 x 2,170 x 2,260 mm)
Machine Weight 20,283 lbs (9,200 kg)
X,Y-Axis Positioning System Driven by full digital AC servo motor with linear scale
X,Y-Axis Minimum Setting Unit 0.00004” (0.001 mm)
X,Y-Axis Position Accuracy Full stroke ± 0.0002” (0.005 mm)
Z-Axis Positioning System Driven by its own motor respectively and independently
Z-Axis Minimum Setting Unit 0.00004” (0.001 mm)
Z-Axis Feeding Speed 1~394 ipm (1~9,999 mm/min)
Drilling Accuracy Within ±.0008" (0.02 mm) (ASTRON Condition)
Air Clamping Stack-PIN
CNC Controller S&M CNC 84.00
CPU Specification 2 GHz
Hard Disk ≧80 GB
Memory Volume 512 MB
Interface USB
Operation System Mouse, Keyboard, LCD Monitor
X,Y-Axis PositionFull stroke ± 0.0002” (0.005 mm)
Drilling AccuracyWithin ±.0008" (0.02 mm) (ASTRON Condition)
Total Power ConsumptionAC200/220V, 50/60Hz, 20KVA
Air Consumption237.8 gal/min (900 L/min)
Compressed Air Requirements99.6-113.8 psi (7-8 kg/cm2)
Vacuum Pressure for Chip Collection1900 mm-H2O
Static Air Pressure for Chip Collection4 CMM

Specifications are subject to change without notice.

Full Line of Vertical Machining Centers

UG Series

X-Axis: 25.1” (640 mm) – 31.5” (800 mm)
Y-Axis: 20.4” (520 mm) – 37.4” (950 mm)
Z-Axis: 18.1” (460 mm) – 25.6” (650 mm)
Spindle: 15,000 RPM or 22,000 RPM

View Models

UG Series

UG630
25.1” (X) x 20.4” (Y) x 18.1” (Z)

UG800
31.5” (X) x 37.4” (Y) x 25.6” (Z)

AA-65 Series

Production #40/#50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 35.4" (900 mm) - 59.1" (1.500 mm)
Y-Axis: 25.6" (650 mm)
Z-Axis: 23.6" (600 mm)
Spindle: 6,000 RPM, 8,000 RPM, or 15,000 RPM

View Models

AA-65 Series

AA1165
43.3" (X) x 25.6" (Y) x 23.6" (Z)

AA1365
51.2" (X) x 25.6" (Y) x 23.6" (Z)

AA1565
59.1" (X) 25.6" (Y) x 23.6" (Z)

AA-80 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 55.1" (1,400 mm) - 63" (1,600 mm)
Y-Axis: 31.5" (800 mm)
Z-Axis: 27.6" (700mm) - 31.5" (800 mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

AA-80 Series

AA1680
63" (X) x 31.5" (Y) x 31.5" (Z)

AA-90 Series

Production #50 Taper Boxway
Fully-equipped Standard Fanuc Controls
X-Axis: 78.7" (2,000 mm)
Y-Axis: 35.4" (900 mm)
Z-Axis: 35.4" (900 mm)
Spindle: 6,000 RPM Geared or 10,000 RPM DD

View Models

AA-90 Series

AA2090
78.7" (X) x 35.4" (Y) x 35.4" (Z)

PRO Series

X-Axis Travel: 39.4" (1,000 mm)
Y-Axis Travel: 23.6" (600 mm)
Z-Axis Travel: 23.6" (600 mm)
Spindle: 12,000 RPM

View Models

PRO Series

740V-PRO
29.5" (X) x 16.7" (Y) x 18.5" (Z)

1060V-PRO
39.4" (X) x 23.6" (Y) x 23.6" (Z)

AQ Series Cast Iron Body - Toyoda Vertical Machining Centers

AQ Series

X-Axis: 31.5" (800mm) to 63" (1,600mm)
Y-Axis: 20.1" (510mm) to 25.6" (650mm)
Z-Axis: 20.1" (510mm) to 24" (610mm)
Spindle: 15,000 RPM Direct Drive

View Models

AQ Series

AQ850
31.5" (X) x 20.1" (Y) x 20.1" (Z)

AQ1050
40.2" (X) x 20.1" (Y) x 20.1" (Z)

AQ1265
47.2" (X) x 25.6" (Y) x 24" (Z)

AQ1465
55.1" (X) x 25.6" (Y) x 24" (Z)

AQ1665
63" (X) x 25.6" (Y) x 24" (Z)

MCV 450 with pallet changer

Integral Pallet Changing Machines

X-Axis Travel: 31.5" (800 mm)
Y-Axis Travel: 17.72" (450 mm)
Z-Axis Travel: 19.7" (500 mm)
Spindle: 12,000 RPM

View Models

Integral Pallet Changing Machines

MCV 450XL
High speed and high performance vertical machining center.

GEMINI MAX Twin Spindle Machining Center

Twin Spindle

X-Axis: 19.7" (500 mm) - 29.5" (750 mm)
Y-Axis: 17.7" (450 mm) - 19.6" (500 mm)
Z-Axis: 18.8" (480 mm) - 23.6" (600 mm)

View Models

Twin Spindle

Gemini Max
29.5" (X) x 19.6" (Y) x 23.6" (Z)

Gemini XL
23.6" (X) x 17.7" (Y) x 23.6" (Z)

Gemini XL Jr.
19.7" (X) x 17.7" (Y) x 23.6" (Z)

Gemini Mini
23.6" (X) x 15.7" (Y) x 18.8" (Z)

DTC400XL Drill Tap Machining Center

Drill Tap Centers

The DTC machines are designed for drill tap applications and full milling capabilities.

View Models

Drill Tap Centers

DTC-400XL
16.7" (X) x 15.75" (Y) x 12.6" (Z)

DTC-400XL-L
27.5” (X) x 15.7” (Y) x 12.6” (Z)

DTC-500XL-L
39.4” (X) x 19.7” (Y) x 12.6” (Z)

TCV-540
16.7" (X) x 15.75" (Y) x 12.6" (Z)

UB 6022 PCB Machine

PCB Drilling Machines

High speed multi-spindle drilling machines designed for Printed Circuit Board (PCB), metals, plastics, etc.

View Models

PCB Drilling Machines

UB-6022D-20
Under the most critical demand for accuracy, efficiency, and drilling on micro holes or thin boards, the needed performance can be easily found on Takisawa's ASTRON UB-6022D-20.