The VB320 is a double column bridge vertical machining center designed for heavy cutting applications. This machine features roller guides, a hydraulic counterbalance system on the headstock, and a powerful spindle. These features allow for highly precise and accurate cuts without sacrificing speed.
Table Size | 122" x 70.8" (3,100 mm x 1,800 mm) |
X-axis Travel | 118.8" (3,020 mm) |
Y-axis Travel (spindle head) | 78.7" (2,000 mm) |
Z-Axis Travel | 31.5" (800 mm) |
Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
Distance Between Columns | 82.6" (2,100 mm) |
Maximum Table Load | 26,400 lb (12,000 kg) |
Spindle Speed | 35 HP (26 kW) / 30 HP (22 kW) |
Spindle Torque | 461 ft-lb (626.2 Nm) |
Spindle Nose | Gearbox (CAT50): 6,000 RPM |
Spindle Taper | 945 ipm (24 m/min) |
Rapid Feedrate (X,Y and Z) | 787.4 ipm (20 m/min) |
Tool Storage Capacity | 590 ipm (15 m/min) |
Maximum Cutting Feedrate | 394 ipm (10 m/min) |
Rapid feedrate - X axis | 32 Standard (60 Optional) |
Rapid feedrate - Y axis | 330" x 208" x 163" (8,376 mm x 5,276 mm x 4,152 mm) |
Cutting feedrate | 59,400 lb (27,000 kg) |
Chip Conveyor | Hinged Belt Lift Up type, 47" Drop Height from floor |
Table Size | 122" x 70.8" (3,100 mm x 1,800 mm) |
X-axis Travel | 118.8" (3,020 mm) |
Y-axis Travel (spindle head) | 78.7" (2,000 mm) |
Z-Axis Travel | 31.5" (800 mm) |
Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
Distance Between Columns | 82.6" (2,100 mm) |
Maximum Table Load | 26,400 lb (12,000 kg) |
Spindle Speed | 35 HP (26 kW) / 30 HP (22 kW) |
Spindle Torque | 461 ft-lb (626.2 Nm) |
Spindle Nose | Gearbox (CAT50): 6,000 RPM |
Spindle Taper | 945 ipm (24 m/min) |
Rapid Feedrate (X,Y and Z) | 787.4 ipm (20 m/min) |
Tool Storage Capacity | 590 ipm (15 m/min) |
Maximum Cutting Feedrate | 394 ipm (10 m/min) |
Rapid feedrate - X axis | 32 Standard (60 Optional) |
Rapid feedrate - Y axis | 330" x 208" x 163" (8,376 mm x 5,276 mm x 4,152 mm) |
Cutting feedrate | 59,400 lb (27,000 kg) |
Chip Conveyor | Hinged Belt Lift Up type, 47" Drop Height from floor |
Table Size | 122" x 70.8" (3,100 mm x 1,800 mm) |
X-axis Travel | 118.8" (3,020 mm) |
Y-axis Travel (spindle head) | 78.7" (2,000 mm) |
Z-Axis Travel | 31.5" (800 mm) |
Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
Distance Between Columns | 82.6" (2,100 mm) |
Maximum Table Load | 26,400 lb (12,000 kg) |
Spindle Speed | 35 HP (26 kW) / 30 HP (22 kW) |
Spindle Torque | 461 ft-lb (626.2 Nm) |
Spindle Nose | Gearbox (CAT50): 6,000 RPM |
Spindle Taper | 945 ipm (24 m/min) |
Rapid Feedrate (X,Y and Z) | 787.4 ipm (20 m/min) |
Tool Storage Capacity | 590 ipm (15 m/min) |
Maximum Cutting Feedrate | 394 ipm (10 m/min) |
Rapid feedrate - X axis | 32 Standard (60 Optional) |
Rapid feedrate - Y axis | 330" x 208" x 163" (8,376 mm x 5,276 mm x 4,152 mm) |
Cutting feedrate | 59,400 lb (27,000 kg) |
Chip Conveyor | Hinged Belt Lift Up type, 47" Drop Height from floor |
Linear Position Accuracy | ± 0.0004" (0.01 mm) full travel |
Linear Repeatability | ± 0.0001" (0.003 mm) |
Coolant Tank Capacity | 106 gallon |
Air Source | 90 psi @ 3.78 CFM |
Total power Required | AC 220V ±10% (60 kVA) |
Specifications are subject to change without notice.
Job Shop FANUC Oi Double Column Bridge Mill
X-Axis: 79.5" (2,020mm) to 158.2" (4,020mm)
Y-Axis: 59" (1,500mm) to 78.7" (2,000mm)
Z-Axis: 31.5" (800mm)
Spindle: #50 6,000 RPM Geared Head
FANUC 31i Double Column Bridge Mill
X-Axis: 83.5" (2,120mm) to 120.5" (3,060mm)
Y-Axis: 47.2" (1,200mm)
Z-Axis: 31.5" (800mm)
Spindle: #50 6K Geared or Highspeed Options
FANUC 31i Double Column Bridge Mill
X-Axis: 83.5" (2,120mm) to 159.8" (4,060mm)
Y-Axis: 63" (1,600mm) to 90.5" (2,300mm)
Z-Axis: 31.5" (800mm) to 39.3" (1000mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Double Column Bridge Mill
X-Axis: 120.5" (3,060mm) to 253.8" (10,000mm)
Y-Axis: 84.6" (2,150mm) to 157.5" (4,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Double Column Bridge Mill
X-Axis: 120.5" (3,060mm) to 253.8" (10,000mm)
Y-Axis: 84.6" (2,150mm) to 157.5" (4,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Moving Gantry Mill
X-Axis: 197" (5,000mm) to 787.4" (20,000mm)
Y-Axis: 118.1" (3,000mm) to 236.2" (6,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Moving Gantry Mill
X-Axis: 197" (5,000mm) to 787.4" (20,000mm)
Y-Axis: 118.1" (3,000mm) to 236.2" (6,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable