The SB416 is fixed rail bridge machine designed for heavy cutting applications. This machine features roller guides, a hydraulic counterbalance system on the headstock, and a powerful spindle. These features allow for highly precise and accurate cuts without sacrificing speed.
The SB416YM model has extended Y-axis travel with 5-face machining capabilities to allow for the machining of complex workpieces. This machine features automatic tool changes in the vertical and horizontal orientations and offers automatic clamping of the headstock. Headstock options include 30 degree, 90 degree, extension, and manual universal.
| Table Size | 157.4" x 59" (4,000 mm x 1,500 mm) |
| X-axis Travel | 159.8" (4,060 mm) |
| Y-axis Travel (spindle head) | 63" (1,600 mm) |
| Y-axis Travel for -YM Configuration | 90.5" (2,300 mm) |
| Z-Axis Travel | 31.5" (800 mm) |
| Optional Z-axis Travel | 39.4" (1,000 mm) |
| Distance Between Table and Spindle Nose in Vertical Position | 7.9" to 39.4" (200 mm to 1,000 mm) |
| Distance Between Columns | 66.9" (1,700 mm) |
| Maximum Table Load | 26,450 lb (12,000 kg) |
| Spindle Speed | 6,000 RPM: 35 HP (26 kW) / 30 HP (22 kW) |
| Spindle Speed | 5:000 RPM: 40 HP (30 kW) / 35 HP (26 kW) |
| Spindle Torque | 6,000 RPM: 461 ft-lb (626.2 Nm) |
| Spindle Torque | 5,000 RPM: 1,115 ft-lb (1,512 Nm) |
| Spindle Nose | Gearbox (CAT50): 6,000 RPM |
| Spindle Nose | Gearbox (CAT50): 5,000 RPM |
| Spindle Taper | 945 ipm (24 m/min) |
| Rapid Feedrate (X,Y and Z) | 945 ipm (24 m/min) |
| Tool Storage Capacity | 590 ipm (15 m/min) |
| Maximum Cutting Feedrate | 394 ipm (10 m/min) |
| Rapid feedrate - X axis | 32 Standard (60, 90, 120 Optional) |
| Rapid feedrate - Y axis | 407" x 183" x 171" (10,358 mm x 4,650 mm x 4,350 mm) |
| Cutting feedrate | 63,934 lb (29,000 kg) |
| Table Size | 157.4" x 59" (4,000 mm x 1,500 mm) |
| X-axis Travel | 159.8" (4,060 mm) |
| Y-axis Travel (spindle head) | 63" (1,600 mm) |
| Y-axis Travel for -YM Configuration | 90.5" (2,300 mm) |
| Z-Axis Travel | 31.5" (800 mm) |
| Optional Z-axis Travel | 39.4" (1,000 mm) |
| Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
| Distance Between Columns | 66.9" (1,700 mm) |
| Maximum Table Load | 26,450 lb (12,000 kg) |
| Spindle Speed | 10,000 RPM: 40 HP (29.8 kW) / 35 HP (26 kW) |
| Spindle Speed | 12,000 RPM: 40 HP (29.8 kW) / 35 HP (26 kW) |
| Spindle Speed | 20,000 RPM: 50 HP (37 kW) / 35 HP (26 kW) |
| Spindle Torque | 10,000 RPM: 258 ft-lb (350 Nm) |
| Spindle Torque | 12,000 RPM: 305 ft-lb (414 Nm) |
| Spindle Torque | 12,000 RPM: 305 ft-lb (414 Nm) |
| Spindle Nose | Direct Drive (CAT50): 10,000 RPM |
| Spindle Nose | Integral Motor (CAT50): 12,000 RPM |
| Spindle Nose | Integral Motor (HSK63): 20,000 RPM |
| Spindle Taper | 945 ipm (24 m/min) |
| Rapid Feedrate (X,Y and Z) | 945 ipm (24 m/min) |
| Tool Storage Capacity | 590 ipm (15 m/min) |
| Maximum Cutting Feedrate | 394 ipm (10 m/min) |
| Rapid feedrate - X axis | 32 Standard (60, 90, 120 Optional) |
| Rapid feedrate - Y axis | 407" x 183" x 171" (10,358 mm x 4,650 mm x 4,350 mm) |
| Cutting feedrate | 63,934 lb (29,000 kg) |
| Table Size | 157.4" x 59" (4,000 mm x 1,500 mm) |
| X-axis Travel | 159.8" (4,060 mm) |
| Y-axis Travel (spindle head) | 63" (1,600 mm) |
| Y-axis Travel for -YM Configuration | 90.5" (2,300 mm) |
| Z-Axis Travel | 31.5" (800 mm) |
| Optional Z-axis Travel | 39.4" (1,000 mm) |
| Distance from Spindle Nose to Table Top | 7.9" to 39.4" (200 mm to 1,000 mm) |
| Distance Between Columns | 66.9" (1,700 mm) |
| Maximum Table Load | 26,450 lb (12,000 kg) |
| Spindle Speed | 6,000 RPM: 35 HP (26 kW) / 30 HP (22 kW) |
| Spindle Speed | 12,000 RPM: 40 HP (29.8 kW) / 35 HP (26 kW) |
| Spindle Torque | 6,000 RPM: 388 ft-lb (526 Nm) |
| Spindle Torque | 12,000 RPM: 305 ft-lb (414 Nm) |
| Spindle Nose | Gearbox (CAT50): 6,000 RPM |
| Spindle Nose | Integral Motor (CAT50): 12,000 RPM |
| Spindle Taper | 945 ipm (24 m/min) |
| Rapid Feedrate (X,Y and Z) | 945 ipm (24 m/min) |
| Tool Storage Capacity | 590 ipm (15 m/min) |
| Maximum Cutting Feedrate | 394 ipm (10 m/min) |
| Rapid feedrate - X axis | 32 Standard (60, 90, 120 Optional) |
| Rapid feedrate - Y axis | 407" x 183" x 171" (10,358 mm x 4,650 mm x 4,350 mm) |
| Cutting feedrate | 63,934 lb (29,000 kg) |
| Linear Position Accuracy | ± 0.0004" (0.01 mm) full travel |
| Linear Repeatability | ± 0.0001" (0.003 mm) |
| Coolant Tank Capacity | 132 gallon |
| Air Source | 90 psi @ 3.78 CFM |
| Total power Required | AC 220V ±10% (60 kVA) |
Specifications are subject to change without notice.
All Stealth VB, SB and LB bridge mills utilize a Fanuc 0iM control.
Job Shop FANUC Oi Double Column Bridge Mill
X-Axis: 79.5" (2,020mm) to 158.2" (4,020mm)
Y-Axis: 59" (1,500mm) to 78.7" (2,000mm)
Z-Axis: 31.5" (800mm)
Spindle: #50 6,000 RPM Geared Head
FANUC 31i Double Column Bridge Mill
X-Axis: 83.5" (2,120mm) to 120.5" (3,060mm)
Y-Axis: 47.2" (1,200mm)
Z-Axis: 31.5" (800mm)
Spindle: #50 6K Geared or Highspeed Options
FANUC 31i Double Column Bridge Mill
X-Axis: 83.5" (2,120mm) to 159.8" (4,060mm)
Y-Axis: 63" (1,600mm) to 90.5" (2,300mm)
Z-Axis: 31.5" (800mm) to 39.3" (1000mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Double Column Bridge Mill
X-Axis: 120.5" (3,060mm) to 253.8" (10,000mm)
Y-Axis: 84.6" (2,150mm) to 157.5" (4,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Double Column Bridge Mill
X-Axis: 120.5" (3,060mm) to 253.8" (10,000mm)
Y-Axis: 84.6" (2,150mm) to 157.5" (4,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Moving Gantry Mill
X-Axis: 197" (5,000mm) to 787.4" (20,000mm)
Y-Axis: 118.1" (3,000mm) to 236.2" (6,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
FANUC 31i Moving Gantry Mill
X-Axis: 197" (5,000mm) to 787.4" (20,000mm)
Y-Axis: 118.1" (3,000mm) to 236.2" (6,000mm)
Z-Axis: 31.5" (800mm) to 55.1" (1400mm)
Spindle: Geared Head or Highspeed Options
Five-Face/Right Angle Head Capable
