The FH800SX-i is a powerful, high-speed horizontal machining center featuring a 6,000 RPM spindle, with options of an 8,000 RPM or 15,000 RPM high-torque spindle, and a rapid feedrate of 2,127 ipm (54 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity. The expansive work envelope allows for large-part machining.
| Pallet Size | 31.5” x 31.5” (800 mm x 800 mm) |
| X-axis Travel | 57.1” (1,450 mm) |
| Y-axis Travel (spindle head) | 49.2” (1,250 mm) |
| Z-Axis Travel | 61” (1,550 mm) |
| Max. Workpiece Swing (diameter) | 59.06” (1,500 mm) |
| Max. Workpiece Height | 59.06” (1,500 mm) |
| Maximum Load on Pallet | 5,500 lb (2,500 kg) |
| Spindle Torque | 887 ft-lb (1,202 Nm) |
| Spindle Speed | 8,000, 15,000 RPM |
| Spindle Taper | CAT50 |
| Rapid Feedrate (X,Y and Z) | 2,127 ipm (54 m/min) |
| Tool Storage Capacity | 60, 121, 240, 330 |
| Pallet Size | 31.5” x 31.5” (800 mm x 800 mm) |
| X-axis Travel | 57.1” (1,450 mm) |
| Y-axis Travel (spindle head) | 49.2” (1,250 mm) |
| Z-Axis Travel | 61” (1,550 mm) |
| Max. Workpiece Swing (diameter) | 59.06” (1,500 mm) |
| Max. Workpiece Height | 59.06” (1,500 mm) |
| Maximum Load on Pallet | 5,500 lb (2,500 kg) |
| Spindle Torque | 887 ft-lb (1,202 Nm) |
| Spindle Speed | 8,000, 15,000 RPM |
| Spindle Taper | CAT50 |
| Rapid Feedrate (X,Y and Z) | 2,127 ipm (54 m/min) |
| Tool Storage Capacity | 60, 121, 240, 330 |
| Pallet Size | 31.5” x 31.5” (800 mm x 800 mm) |
| X-axis Travel | 57.1” (1,450 mm) |
| Y-axis Travel (spindle head) | 49.2” (1,250 mm) |
| Z-Axis Travel | 61” (1,550 mm) |
| Max. Workpiece Swing (diameter) | 59.06” (1,500 mm) |
| Max. Workpiece Height | 59.06” (1,500 mm) |
| Maximum Load on Pallet | 5,500 lb (2,500 kg) |
| Spindle Torque | 887 ft-lb (1,202 Nm) |
| Spindle Speed | 8,000, 15,000 RPM |
| Spindle Taper | CAT50 |
| Rapid Feedrate (X,Y and Z) | 2,127 ipm (54 m/min) |
| Tool Storage Capacity | 60, 121, 240, 330 |
| Linear Position Accuracy | ± .00012” (.003 mm) full stroke | |
| Linear Repeatability | ± .00006” (.0015 mm) | |
| Rotary Table Index Accuracy | ± 7 arc seconds | |
| Rotary Table Index Repeatability | ± 3.5 arc seconds |
| Hydraulic Oil | Mobil DTE Oil Light (4.75 gal) | |
| Slideway Lubrication | Mobil Vactra #2 (.76 gal) | |
| Spindle Bearing Lubrication | Mobil Velocite #6 (.76 gal) | |
| Spindle Cooling | Mobil Velocite #3 (5.28 gal) | |
| Table Lubrication | Mobil Gear 600 XP 150 (1 gal) | |
| Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) | |
| Power Capacity (Machine Wired: 208V - Transformer Not Included) | 59 kVA |
Specifications are subject to change without notice.
No stranger to JTEKT, CAT upgraded their fleet with new Horizontal Machining Centers.
The FH800SX-i is a powerful, high-speed horizontal machining center.
Pallet Range
21.65" x 21.65" (550 mm x 550 mm)
2,200 lb (1,000 kg) Capacity
Ø2.95" x 20.07" (Ø75mm × 510mm) to
Ø4.72" x 21.45" (Ø120mm × 545mm)
Pallet Range
15.7" sq. (400mm) to 17.7" sq. (450mm)
880 lb (400 kg) Capacity
Ø24.80" x 29.53" (Ø630 mm x 750 mm) to
Ø24.80" x 35.43" (Ø630 mm x 900 mm)
Pallet Range
19.68" sq. (500mm) to 21.65" sq. (550mm)
1,760 lb (800 kg)
Ø31.50" x 39.37" (Ø800 mm x 1,000 mm) to
Ø33.46" x 39.37" (Ø850 mm x 1,000 mm)
Pallet Range
24.8" sq. (630mm)
3,310 lb (1,500 kg)
Ø46.06" x 49.21" (Ø1,170 mm x 1,250 mm)
Pallet Range
31.5" sq (800mm)
5,500 lb (2,500 kg)
Ø39.4" x 25.6" (Ø1,000 mm x 650 mm) to
Ø63" x 51.2" (Ø1,600 mm x 1,300 mm)
Pallet Range
39.4" sq. (1000mm) to 41.3" (1050mm)
6,600 lb (3,000 kg)
Ø70.9" x 63" (Ø1,800 mm x 1,600 mm) to
Ø72.8" x 61" (Ø1,850 mm x 1,550 mm)
Pallet Range
49.2" sq. (1,250mm)
11,000 lb (5,000 kg)
Ø94.5" x 70.9" (Ø2,400 mm x 1,800 mm)
Pallet Range
63" x 49.2" (1,600 mm x 1,250 mm)
17,600 lb (8,000 kg) (Opt. 32,000 lb)
Ø126" x 83" (Ø3,200 mm x 2,100 mm)
