Automation Simplifies Large Part Handling
Stecker Machine Co., Inc. was in search of a solution for machining, deburring and washing a large casting weighing almost 200 lb. The par…
The FH630SX-i is a powerful, high-speed horizontal machining center featuring an 8,000 RPM spindle, with the option of a 15,000 RPM high-torque spindle, and a rapid feedrate of 2,362 ipm (60 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity.
Pallet Size | 24.8" x 24.8" (630 mm x 630 mm) |
Table Index | Full NC table (360,000 positions) |
X-axis Travel | 41.34” (1,050 mm) |
Y-axis Travel (spindle head) | 35.43” (900 mm) |
Z-Axis Travel | 41.34” (1,050 mm) |
Max. Workpiece Swing (diameter) | 46.06” (1,170 mm) |
Max. Workpiece Height | 49.21" (1,250 mm) |
Maximum Load on Pallet | 3,306 lb (1,500 kg) |
Spindle Torque | 391 ft-lb (530 Nm) |
Standard Spindle | Cat #50 74HP 8,0000 RPM (1,202 Nm) |
Spindle Speed | CAT#50 50HP 15,000 RPM (Wide Range 530 Nm) |
Spindle Taper | 2,362 ipm (60 m/min) |
Rapid Feedrate (X,Y and Z) | 2,362 ipm (60 m/min) |
Tool Storage Capacity | 2,362 ipm (60 m/min) |
Rapid feedrate - X axis | 60 Standard (121 Optional) |
Rapid feedrate - Y axis | 141.7" x 271.6" (3,600 mm x 6,900 mm) |
Rapid feedrate - Z axis | 126.1" (3,203 mm) |
Cutting feedrate | 43,210 lb (19,600 kg) |
Pallet Size | 24.8" x 24.8" (630 mm x 630 mm) |
Table Index | Full NC table (360,000 positions) |
X-axis Travel | 41.34” (1,050 mm) |
Y-axis Travel (spindle head) | 35.43” (900 mm) |
Z-Axis Travel | 41.34” (1,050 mm) |
Max. Workpiece Swing (diameter) | 46.06” (1,170 mm) |
Max. Workpiece Height | 49.21" (1,250 mm) |
Maximum Load on Pallet | 3,306 lb (1,500 kg) |
Spindle Torque | 123 ft-lb (167 Nm) |
Spindle Speed | CAT#50 30HP 15,000 RPM (0-15,000 in 2.6 sec) |
Spindle Taper | 2,362 ipm (60 m/min) |
Rapid Feedrate (X,Y and Z) | 2,362 ipm (60 m/min) |
Tool Storage Capacity | 2,362 ipm (60 m/min) |
Rapid feedrate - X axis | 60 Standard (121 Optional) |
Rapid feedrate - Y axis | 141.7" x 271.6" (3,600 mm x 6,900 mm) |
Rapid feedrate - Z axis | 126.1" (3,203 mm) |
Cutting feedrate | 43,210 lb (19,600 kg) |
Pallet Size | 24.8" x 24.8" (630 mm x 630 mm) |
Table Index | Full NC table (360,000 positions) |
X-axis Travel | 41.34” (1,050 mm) |
Y-axis Travel (spindle head) | 35.43” (900 mm) |
Z-Axis Travel | 41.34” (1,050 mm) |
Max. Workpiece Swing (diameter) | 46.06” (1,170 mm) |
Max. Workpiece Height | 49.21" (1,250 mm) |
Maximum Load on Pallet | 3,306 lb (1,500 kg) |
Spindle Torque | 744 ft-lb (1,009 Nm) |
Spindle Speed | CAT#50 50HP 8,000 RPM (High Torque 1,009 Nm) |
Spindle Taper | 2,362 ipm (60 m/min) |
Rapid Feedrate (X,Y and Z) | 2,362 ipm (60 m/min) |
Tool Storage Capacity | 2,362 ipm (60 m/min) |
Rapid feedrate - X axis | 60 Standard (121 Optional) |
Rapid feedrate - Y axis | 141.7" x 271.6" (3,600 mm x 6,900 mm) |
Rapid feedrate - Z axis | 126.1" (3,203 mm) |
Cutting feedrate | 43,210 lb (19,600 kg) |
Linear Position Accuracy | ± .00012" (.003 mm) full stroke | |
Linear Repeatability | ± .00008" (.002 mm) | |
Rotary Table Index Accuracy | ± 7 arc seconds | |
Rotary Table Index Repeatability | ± 3.5 arc seconds |
Hydraulic Oil | Mobil DTE Oil Light (4.75 gal) | |
Slideway Lubrication | Mobil Vactra #2 (.76 gal) | |
Spindle Bearing Lubrication | Mobil Velocite #6 (.76 gal) | |
Spindle Cooling | Mobil Velocite #3 (9.2 gal) | |
Table Lubrication | Mobil Gear 600 XP 150 (.8 gal) | |
Air Source | 56 ~ 70 psi (4 ~ 5 kgf / cm²) | |
Power Capacity (Machine Wired: 208V - Transformer Not Included) | 43 kVA |
Specifications are subject to change without notice.
No stranger to JTEKT, CAT upgraded their fleet with new Horizontal Machining Centers.
Daimler reduces production time by 15% with the FH630SX-i Horizontal Machining Center with Vertical Pallet Pool.
Learn about how Miller Fabrication Solutions, of Brookville, PA, automates production with Flexible Manufacturing Systems (FMS) and utilizes the multi-pallet FH630SX Horizontal Machining Center
The FH630SX-i horizontal machining center is fast and powerful, enabling heavy cuts with the best speed and performance in its class.
The FH630SX-i horizontal machining center is built to rough and finish the high temperature alloys of any complex part and material.
The FH630SX-i horizontal machining center has an enlarged C-axis swivel range of 230 degrees for better workpiece access
FH630SX Horizontal Machining Center and JTEKT Machinery's flexible metal cutting system TIPROS FMS
JTEKT Machinery introduced the newly redesigned FH630SX-i during IMTS 2014.
Powerful, high-speed 630 mm horizontal machining center with spindle speeds reaching up to 15,000K RPM.
The FH630SX-i horizontal machining center reduces cycle times with powerful control and cutting capabilities.
Pallet Range
21.65" x 21.65" (550 mm x 550 mm)
2,200 lb (1,000 kg) Capacity
Ø2.95" x 20.07" (Ø75mm × 510mm) to
Ø4.72" x 21.45" (Ø120mm × 545mm)
Pallet Range
15.7" sq. (400mm) to 17.7" sq. (450mm)
880 lb (400 kg) Capacity
Ø24.80" x 29.53" (Ø630 mm x 750 mm) to
Ø24.80" x 35.43" (Ø630 mm x 900 mm)
Pallet Range
19.68" sq. (500mm) to 21.65" sq. (550mm)
1,760 lb (800 kg)
Ø31.50" x 39.37" (Ø800 mm x 1,000 mm) to
Ø33.46" x 39.37" (Ø850 mm x 1,000 mm)
Pallet Range
24.8" sq. (630mm)
3,310 lb (1,500 kg)
Ø46.06" x 49.21" (Ø1,170 mm x 1,250 mm)
Pallet Range
31.5" sq (800mm)
5,500 lb (2,500 kg)
Ø39.4" x 25.6" (Ø1,000 mm x 650 mm) to
Ø63" x 51.2" (Ø1,600 mm x 1,300 mm)
Pallet Range
39.4" sq. (1000mm) to 41.3" (1050mm)
6,600 lb (3,000 kg)
Ø70.9" x 63" (Ø1,800 mm x 1,600 mm) to
Ø72.8" x 61" (Ø1,850 mm x 1,550 mm)
Pallet Range
49.2" sq. (1,250mm)
11,000 lb (5,000 kg)
Ø94.5" x 70.9" (Ø2,400 mm x 1,800 mm)
Pallet Range
63" x 49.2" (1,600 mm x 1,250 mm)
17,600 lb (8,000 kg) (Opt. 32,000 lb)
Ø126" x 83" (Ø3,200 mm x 2,100 mm)